PET Bottle Injection Moulding Machine

Detailed Product Description

PET Bottle preform Injection Moulding Machine:

 

Please refer to the following data for our PET bottle injection moulding machine.

we can make PET preform injection moulding machine with up to  96cavities. 48cavities with cycle time 8seconds. on this 48cavities,to make 17grams preform,can be 21600pcs per hour capacity.

technical  parameters:

Model			PET330-48	PET450-72	PET630-96
INJECTION UNIT	Screw Diametermm		100	110	120
	Screw L/D Ratio		25	25	25
	Screw Speedrpm		80	80	80
	Plasticizing Capacityg/s		220	280	380
	Shot Volume (PS)cm3		2198	2945	4568
	Shot WeightgPET1.2		2640	3533	5480
	Shot PressureMPa		120	100	126
	Shot Speedcm3/s		1220	1636	2280
CLAMPING UNIT	Clamping ForcekN		3300	4500	6300
	Distance Between Tie Rods (WxH)mm		670×780	790×780	1000×1100
	Clamping Strokemm		1180	1250	1500
	Close Daylightmm		320	350	350
	Max.Daylightmm		1500	1600	1850
	Ejector ForcekNCenter		160	160	160
	Ejector ForcekNFour Auxiliary Cylinders		140Two Auxiliary Cylinders	290	450
	Ejector StrokemmCenter		220	220	220
	Ejector Stroke (mm) (Four Auxiliary Cylinders)		35	35	35
	The Number of Ejector Pole		7	9	19
CONTROL SYSTEM	System PressureMPa		14.5
	Pump Motor PowerkW		120	120	185
	Screw Heating PowerkW		65	75	85.5
	Mould Heating PowerkW		50	70	90
	Temperature Range0400		One-to-one Control
	Mechanical Hand PowerkW		10	15	30
MOULD	The Number of Cavities		48	72	96
	Max. Preform Length (mm)		190	220	220
	Max. Neck (mm)		42
	Max. Preform Weight (g)		40	40	40
	Mould Structure		Pneumatic Pin Valve Hot-runner
OTHER EQUIPMENT	Mechanical Hand		Three Station Fetching System
	Freezing Water	Temperature	515
		PressureMPa	0.45
		Flow  (L/min)	600	900	1200
	Cooling Water	Temperature	<25
		PressureMPa	0.25
		Flow  (L/min)	200	300	300
	Compressing Air	PressureMPa	0.70.9
		Flow  (L/min)	800	1200	1600
OTHER	Machine Size (m)		8.9×4.0×2.5	10×4.3×2.6	11.8×4.6×2.8
	Machine Weight (t)		25	33	40